OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0334

Software Incompatibility With Radio

On current vehicles the radio is the infotainment head unit: besides audio it runs navigation, voice control, phone connection and the setting menus for other systems such as seat heating. U0334 is stored when a controller relying on these services rejects the radio's software. No manufacturer documents U0334 publicly. FCA illustrates how tightly radio software levels build on each other: Uconnect 8.4 radios in European Jeep Cherokee 2019–2020 needed up to three USB stages to reach level 39.5, and skipping a stage could damage the unit so badly that it had to be replaced (08-033-21). On the Jeep Compass, an earlier update to 28.31 could leave the radio silent and grey out the heated seat and steering wheel buttons until 39.2 was installed (08-068-20). U0184 is lost contact, U0485 invalid data. No MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 34

Possible causes

  • Radio update done out of sequence or with a skipped intermediate level high
  • Head unit replaced by a variant for another market or equipment medium
  • Other modules updated while the radio stayed on an old level low

Symptoms

  • No sound or missing functions on the head unit
  • Comfort settings shown greyed out in the radio menus
  • Code appears after a radio update or replacement

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0334

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication