U0333
Software Incompatibility With Gear Shift Control Module B
With shift-by-wire, both the driver's selector and the unit that actually moves the range are electronic modules; module B denotes a second such unit, either a further selector or the shift actuator. U0333 means its software or calibration does not fit the partner controller. Allison lists it for the sixth-generation controls of its 3000 and 4000 series, released in 2021, as Gear Shift Module 2 Incompatible, next to U0304 for module 1; the same bulletin warns that new push-button selectors do not work with fifth-generation TCMs and that the fitted selector must match the TCM calibration (SIL 14-TR-21). Lexus labels the shift actuator ECU of the 2022 NX 350 and NX 250 with B and reflashed its main and sub calibration in campaign 22LC03. U0291 is lost contact, U0592 invalid data.
Possible causes
- Selector or actuator of another generation or part number fitted high
- Transmission calibration specifies a different selector than the one fitted medium
- Shift actuator ECU still on an outdated calibration low
Symptoms
- Range changes requested at this unit are ignored
- Transmission warning or shift indicator fault
- Vehicle stays in or returns to neutral or park
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0333
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.