OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0332

Software Incompatibility With Multi-axis Acceleration Sensor Module A

Multi-axis acceleration sensor module A measures yaw rate plus lateral and longitudinal acceleration for stability control and driver assistance; it can be a separate box or part of another controller. U0332 means a receiving controller rejects its software or variant. No manufacturer documents U0332 publicly. GM treats the unit as a programmable module in its own right: the warranty labour list has a separate operation for reprogramming it with SPS (06-08-47-001N), and after the brake controller of the 2014 Cadillac ELR was recalibrated, the yaw rate sensor learn is run in this module (recall 14087). Audi removed sporadic C051F00, a correlation fault of sensor module A on e-tron models, with new software for ABS unit J104 and suspension unit J775 (2061908). U0125 is lost contact. Stability control may switch off.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 32

Possible causes

  • Sensor module replaced by a part with another software or variant high
  • Brake or suspension controller updated without matching the sensor module medium
  • Yaw rate sensor learn skipped after programming low

Symptoms

  • Stability control or traction control warning lamp on
  • Driver assistance functions unavailable
  • Code follows module replacement or software update

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0332

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication