U0330
Software Incompatibility With Tire Pressure Monitor Module
The tyre pressure monitor module receives the radio messages of the wheel sensors, evaluates the pressures and, on many systems, works out which sensor sits on which wheel; from this it drives the warning lamp and cluster messages. U0330 is set when a partner controller finds the software or variant of this module unsuitable, usually after a replacement or a partial update. No manufacturer documents U0330 publicly. Porsche shows how much depends on that software: on Panamera and Cayenne from 2017, version 0630 could raise a TPM fault message for no reason, and the unit had to be reprogrammed and coded (90/18). FCA reflashed the TPM software of 2014–2015 Journey, Durango, Charger and Grand Cherokee when sensor location codes C151D and C1581 appeared (08-024-15). U0127 is lost contact. Only the tyre warning is affected.
Possible causes
- TPMS module replaced or taken from another vehicle without programming and coding high
- Module still on a software level that the partner controllers no longer accept medium
- Module configured for another wheel, tyre or sensor variant low
Symptoms
- Tyre pressure warning lamp or TPMS fault message in the cluster
- Tyre pressures not shown or shown on the wrong wheel
- Code appears after work on the TPMS module or a software update
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0330
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.