U032A
Software Incompatibility With A/C Compressor Control Module
The A/C compressor control module drives an electric refrigerant compressor, as used in hybrid and electric cars, and reports speed and status to the climate controller. U032A means that controller considers the compressor module's software or learned data invalid. Volkswagen and Audi document the code: in the 2021 ID.4 a dead A/C with U032A00 first calls for checking a pending software campaign, not for a new compressor (tech tip 87-23-02TT). On 2022–2023 Audi Q4 e-tron the HVAC electronics J979 store U032A00 when the compressor module J842 has lost its adaptation; running the compressor calibration in the guided test restores cooling (2071838), and a later bulletin names the ME 3.5 update package as the production fix (2074321). U016B is lost contact, U046C invalid data, U0324 concerns the HVAC module. The cabin is not cooled.
Possible causes
- Compressor module lost its adaptation and needs the calibration routine high
- Climate or compressor software below the level of an open update campaign high
- Electric compressor replaced without programming and calibration low
Symptoms
- Air conditioning blows warm, compressor does not run
- Fault returns after a while even when cooling was restored
- On electric cars battery cooling or preconditioning may be limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U032A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.