U0322
Software Incompatibility With Body Control Module
The body control module switches lighting, locks, wipers and many comfort functions and often holds configuration data used by other units. U0322 tells that a controller has found the BCM software or setup unfit for the vehicle. The code without a letter is meant for cars with one body controller; where two are fitted, U0331 names body control module A and U0339 module B. No manufacturer documents U0322 publicly. Ford shows the kind of mismatch on 2022 F-150 trucks (SSM 51591): following a software update of the BCM one or both headlamps could stay dark, sometimes with B14E5:08 or B14E7:08, because the LED headlamp module did not work with the new BCM software; Ford brings the BCM to the latest level and replaces the LED module. U0140 is lost contact, U0422 invalid data. Body functions fail, no MIL.
Possible causes
- BCM replaced or swapped without loading vehicle configuration high
- BCM updated while a connected unit such as a headlamp module kept old software medium
- BCM programming interrupted by low voltage or lost connection low
Symptoms
- Headlamps, interior lights or wipers work wrongly or not at all
- Central locking or remote key functions unreliable
- Several body codes stored at the same time
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0322
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.