OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0321

Software Incompatibility With Suspension Control Module A

Suspension control module A manages adjustable dampers, air springs or ride height, and on some cars it also leads active roll control; some code lists call it the ride level module. U0321 tells that a partner controller considers its software unfit. No manufacturer documents U0321 publicly. Bentley describes the typical situation on 2017–2021 Bentayga with active anti-roll bars (technical product information 2055643/2): after software or hardware of the adaptive suspension unit J775 or of the roll stabiliser units J924 and J1096 was replaced, the versions could stop matching, and the workshop must compare and align them. Jeep, in contrast, flags a fresh air suspension module on 2021–2022 Grand Cherokee with U0300 until it is flashed (08-109-22). U0132 is lost contact, U0421 invalid data. Ride height or damping may stay fixed.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 21

Possible causes

  • Replacement suspension or roll control unit carries a software level the partners do not accept high
  • Only one of the linked chassis modules updated medium
  • Suspension module coded for another equipment level low

Symptoms

  • Suspension warning in the cluster
  • Ride height cannot be adjusted or vehicle sits at one level
  • Firm or uneven damping, more body roll

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0321

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication