U0320
Software Incompatibility With Power Steering Control Module
The power steering control module drives the electric assist motor and needs calibration data that suit the steering gear and the vehicle. U0320 is logged when another module refuses to work with its software. No manufacturer documents U0320 publicly, but GM and Volkswagen show the background. GM preliminary information PIC5771 for the 2013 Buick LaCrosse with NJ2 steering reports that after a gear replacement the module often refused programming and set C056E symptom 42, calibration not programmed, so Techline had to supply the data. Volkswagen cured weak assist on 2010–2013 Golf, Jetta, Passat and Beetle by new J500 software, followed by basic settings of steering and angle sensor. U0131 is lost contact, U0420 invalid data, U0319 concerns the steering effort module. Steering may turn heavy with a warning lamp.
Possible causes
- Steering gear or steering module replaced without loading matching calibration high
- Steering module software older than required by the other modules medium
- Basic setting or adaptation after programming not carried out medium
- Programming disturbed by voltage drop low
Symptoms
- Steering heavy or assist only partly available
- Power steering warning lamp or message
- Lane keeping or park steering functions switched off
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U0320
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.