OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U031F

Software Incompatibility With Accessory Protocol Interface Module

The accessory protocol interface module (APIM) is the SYNC computer, as Ford calls it, behind the centre screen, which handles audio sources, phone, voice control and navigation. U031F tells that a connected unit finds the APIM software unsuitable. Ford shows the underlying problem on 2018–2019 Lincoln Navigator (SSM 51464): after a 10-inch centre display was renewed, the screen could fail to power up because displays from part number JL7T-18B955-UG onward need a newer SYNC software level; the remedy is an APIM software update with FDRS. Ford does not name U031F in that bulletin. The APIM is not part of engine control, so no MIL is expected. U0253 means lost contact, U0554 invalid data. Typical signs are a dark or restarting screen and missing phone, audio or navigation.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 1F

Possible causes

  • Replacement display or other unit needs a newer SYNC software level than installed high
  • APIM replaced or swapped without module installation and configuration medium
  • SYNC update interrupted or installed only partly low

Symptoms

  • Centre screen stays dark or keeps rebooting
  • No radio, phone or navigation functions
  • Rear camera picture or touch controls missing on the screen

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U031F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication