U031E
Software Incompatibility With Parking Assist Control Module B
Parking assist control module B is a second park aid unit, found where front and rear sensors are split between controllers or an automatic parking controller sits beside the distance warning; which unit gets the letter B is decided by each maker. U031E is set when a partner module rejects the software or setup of module B, mostly after a replacement or an incomplete update. No manufacturer documents U031E publicly. FCA illustrates how such units react to bad calibration data: on 2015–2016 Jeep Renegade with ParkSense or parallel and perpendicular park assist, the park assist module stored B1000-46, the cluster announced that ParkSense was not available, and only a reflash at stable voltage helped (08-078-16). U0243 is lost contact, U0544 invalid data, U031D covers module A. Distance warnings or self-parking stay off.
Possible causes
- Second parking module replaced or taken from another car without programming high
- Module variant does not match the fitted sensor set or parking option medium
- Software update of the parking module interrupted or incomplete low
Symptoms
- Park assist unavailable message in the cluster
- No warning tones from front or rear sensors
- Automatic parking function cannot be started
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U031E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.