U031C
Software Incompatibility With Brake System Control Module B
In GM's hybrid OBD tables brake system control module B is the electromechanical brake booster (Bosch iBooster), which builds brake pressure without engine vacuum and works hand in hand with the stability control unit. The 2016 to 2019 tables describe the check behind U031C: the stability module receives a compatibility index from the booster over CAN and compares it with its own configuration. If the index stays incompatible for 0.1 s, the code is stored, provided supply voltage is between 7.5 and 16 V, the bus is active and 5 s have passed after a power mode change. GM classes it as Type A: the warning lamp comes on during the very first drive with the fault. U01B4 is lost contact, U04B5 invalid data from module B, U0318 concerns the main brake module. Expect brake warnings and possibly reduced electric boost.
Possible causes
- Brake booster unit replaced or swapped without programming to the vehicle high
- Stability control module updated or configured for another booster variant medium
- Programming interrupted, for example by low battery voltage low
Symptoms
- MIL on and brake or stability warning in the cluster
- Changed pedal feel or reduced electric brake boost
- Code appears right after brake booster or ESP module work
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U031C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.