OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0315

Software Incompatibility With Anti-Lock Brake System (ABS) Control Module

U0315 concerns the ABS control module, which on most cars also hosts traction and stability control. A partner module stores the code when the brake controller's software, calibration or option configuration does not fit, typically after a module was replaced without setup. GM documents it under its own name: the 2011 Saab 9-5 and 9-4X code lists give U0315 to the electronic brake control module, and the procedure runs whenever supply voltage lies within 9-16 V and the bus is operating; there is no circuit test, the fix is configuration or programming. On the 2016-2017 Cadillac CT6 a new EBCM calibration stopped false U0435 entries against the rear steering (17-NA-130). ABS, traction and stability warnings may light while basic braking remains; the MIL is normally off. U0121 means lost contact, U0415 invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 15

Possible causes

  • ABS/EBCM replaced and not configured or programmed for the vehicle high
  • Used unit from a vehicle with different equipment or drivetrain medium
  • Engine, steering or chassis module updated to a level the ABS unit does not support low

Symptoms

  • ABS, traction control and stability warning lamps on
  • Stability and assistance functions switched off
  • Code present right after brake module replacement

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0315

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication