OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0314

Software Incompatibility With Four-Wheel Drive Clutch Control Module

The four-wheel-drive clutch control module decides how much torque an on-demand coupling, such as a Haldex-type multi-plate clutch, passes to the secondary axle, using wheel speed, torque and brake data from other units. U0314 is stored when one of those partners rejects the module's software or calibration, for instance after the coupling, its controller or the engine controller was replaced or updated separately. No manufacturer documents U0314 publicly. Kia shows that the coupling logic lives in software: on 2024-2025 Seltos AWD it updates the 4WD software because drive to the rear wheels could drop out, with a Check AWD warning, the MIL and codes P1958 and P1960 (bulletin ELE374, SA605). With U0314 the car usually falls back to front- or rear-wheel drive and shows a warning. U0114 means lost contact, U0414 invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 14

Possible causes

  • Coupling or its controller replaced without programming or coding high
  • AWD software level not matching engine, transmission or ABS software medium
  • Used module from a vehicle with another drivetrain variant low

Symptoms

  • AWD/4WD warning, drive only on one axle
  • Reduced traction on slippery roads or when pulling away
  • Code appears after coupling or controller work

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0314

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication