OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0313

Software Incompatibility With Battery Energy Control Module B

Battery energy control module B is a second battery controller, for instance a sub-unit inside the pack that measures part of the cells for the main battery management. U0313 means the network does not accept its software or calibration. No manufacturer documents U0313 publicly. Mitsubishi's 2018 Outlander PHEV has such a pair: the main BMU expects frames from a sub-BMU and records U0112 after 0.3 s without them. Bulletin TSB-18-54-005 shows that the sub-unit's software matters on its own: a wrongly programmed sub-BMU took electrical noise for a fault in the leak detection circuit, lit several warning lamps and held the car to 60 km/h until it was reflashed. A mismatch flagged by U0313 can have similar effects: hybrid warning, MIL and limited power. U0312 covers module A, U0413 invalid data from module B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 13

Possible causes

  • Sub-module software outdated or faulty, newer level required high
  • Module B or battery section replaced with a different variant medium
  • Main battery management updated without module B medium

Symptoms

  • Several warning lamps including MIL and hybrid system warning
  • Power or speed limited until the next restart
  • Electric operation or charging restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0313

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication