OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0312

Software Incompatibility With Battery Energy Control Module A

Battery energy control module A supervises the high-voltage or 48 V battery: cell voltages, temperatures, current, state of charge and contactors. U0312 is stored when a partner, usually the hybrid or vehicle controller, refuses the BECM's software or calibration, for example after a pack or module replacement. Ford's 2014 code interpretation marks U0312 as a MIL code. For the lost-contact code GM shows that software alone can cure it: on the 2011-2013 Volt, U0111 should be fixed by loading the latest BECM calibration rather than swapping the module (PIC5829). Without accepted battery data the drive system restricts charging and discharging; CARB includes hybrid components in OBD monitoring. Expect a hybrid warning, MIL and less electric operation. U0111 means lost contact, U0412 invalid data, U0313 covers module B.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 12

Possible causes

  • BECM calibration outdated or not matching the hybrid controller software high
  • Battery pack or BECM replaced without programming medium
  • Hybrid or vehicle controller updated without the BECM low

Symptoms

  • Hybrid/EV system warning and MIL
  • Electric driving or charging limited or unavailable
  • Engine runs more often in hybrids

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0312

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication