OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0310

Software Incompatibility With Fuel Pump Control Module

A fuel pump control module drives the in-tank pump at variable speed so that the pressure requested by the engine controller is reached. U0310 is set when the two controllers do not accept each other's software or calibration. No manufacturer documents U0310 publicly. GM's 2013 Cadillac ATS 2.5 L shows how tightly the pair belongs together: against a rough idle GM released matching software for the ECM and the FPCM and had both reprogrammed, each in its own session (PI1092B). Ford's 2014 code interpretation already gives the lost-contact code U0109 the MIL marker, and Roush CleanTech's propane trucks use two pump modules, A and B, so the letter in related codes matters. A mismatched pump module can deliver the wrong pressure, causing lean running, misfires or a no-start; a MIL is likely. U0410 covers invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 10

Possible causes

  • Replacement or aftermarket pump module with software for another application high
  • Engine controller reprogrammed, matching FPCM calibration not loaded medium
  • Interrupted programming of the pump module low

Symptoms

  • Hard start or no start, stalling
  • Hesitation, lean running or misfire under load
  • MIL and fuel pressure codes

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0310

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication