OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U030F

Software Incompatibility With Reductant Control Module

The reductant control module runs the urea side of an SCR system: pump, dosing valve, line heaters and level reading. U030F means the engine controller has found that this module's software or calibration does not belong with its own, for example after either unit was swapped or reflashed. No manufacturer documents U030F publicly, but how software-dependent the module is can be seen in bulletins. GM's 2018 Cruze diesel needed a reflash of the K115 reductant control module because the DEF level shown did not update after refilling (18-NA-058), and FCA reprogrammed the dosing control unit of 2016 Ram 2500/3500 Cummins trucks, replacing it where necessary (25-003-17). Because SCR controls NOx, a MIL and, under CARB inducement rules, power or speed limits are possible. U010E is lost contact, U040F invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 0F

Possible causes

  • Dosing/reductant control unit software outdated or not released for the engine calibration high
  • Dosing unit or DEF tank assembly with integrated controller replaced by another variant medium
  • Engine controller reprogrammed without the reductant control module medium

Symptoms

  • MIL and DEF/SCR warning in the cluster
  • Wrong or frozen DEF level display
  • Countdown to speed limit or reduced power

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U030F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication