U030E
Software Incompatibility With NOx Sensor B
NOx sensor B is usually the downstream sensor after the SCR catalyst, the one whose reading reveals how well the catalyst converts and guides the correction of urea dosing. U030E is stored when its software or calibration identity does not match what the engine controller expects, for instance after a replacement sensor with another part number or a controller update the sensor does not support. Ford's 2014 code interpretation gives U030E the MIL marker, just as for sensor A (U030D). In Ford's 2023 diesel summary sensor B is regarded as lost after about 1 s without frames (U029E), and the 2015 summary also lists invalid data from it (U059F). Without a trusted downstream value the SCR efficiency test cannot run, so readiness stays open; a MIL and, depending on the market, DEF-related warnings follow.
Possible causes
- Downstream NOx sensor replaced with a part of another number or software level high
- Upstream and downstream sensors swapped or coded to the wrong position medium
- Engine controller update requiring a newer sensor version low
Symptoms
- MIL and SCR/emission warning
- SCR efficiency monitor never completes
- Possible DEF countdown on some trucks
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U030E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.