OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U030C

Software Incompatibility With Reductant Quality Module

The reductant quality module tells the SCR system whether the tank holds proper urea solution (DEF/AdBlue); in many trucks it sits in the tank unit together with level and temperature sensing. U030C means the engine or dosing controller has rejected its software or calibration, as after a tank or sensor replacement with the wrong part number. Ford's 2014 code interpretation flags U030C as a MIL code; Ford's 2023 diesel summary calls the module RDQM and treats 5 s without its frames as lost communication (U02A2). CARB lets makers skip a direct reductant quality monitor only if an inducement strategy prevents long operation on poor fluid and its inputs, such as this sensor, are monitored themselves. Hence a MIL, DEF warnings and, if left unresolved, speed limits. U05A3 covers invalid data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 0C

Possible causes

  • DEF tank unit or quality sensor of a different part number installed high
  • Engine or dosing controller updated, quality module left on old software medium
  • Programming interrupted or wrong file loaded low

Symptoms

  • MIL and DEF/AdBlue system warning
  • Countdown to speed limitation or no-restart shown
  • Code appears after tank, heater or sensor replacement

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U030C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication