OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0309

Software Incompatibility With Alternative Fuel Control Module

An alternative fuel control module runs the gaseous fuel side of a bi-fuel or dedicated LPG or CNG engine and works alongside the gasoline or diesel controller. CARB counts such engines as alternate-fueled vehicles that fall under OBD II. U0309 is set when the partners find the module's software or calibration does not match theirs, for example after a conversion system or one of the controllers was updated on its own. Ford's 2014 code interpretation lists U0309 with the MIL marker. Roush CleanTech's propane systems for Ford E- and F-Series trucks show the arrangement: a smart relay module of the propane side talks to the Ford PCM and keeps its own fault list, including an internal software incompatibility code. U0108 means lost contact, U0409 invalid data. Expect a MIL and a fallback to the base fuel or rough running on gas.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 09

Possible causes

  • Gas system module software not released for the current engine controller calibration high
  • PCM/ECM reflashed by a dealer without updating the gas system module medium
  • Gas system module replaced with a unit of another variant low

Symptoms

  • Engine stays on or switches back to gasoline/diesel
  • MIL and gas system warning on
  • Rough running or hesitation in gas mode

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0309

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication