OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0302

Software Incompatibility With Transmission Control Module

U0302 points to a software or calibration conflict between the transmission controller and its partners. Volkswagen's 2014 Touareg and CC emission specification books show a typical trigger: the engine controller sets U0302 when it is coded for the wrong gearbox type, for instance it receives automatic transmission frames while coded for a manual, or is coded automatic in a manual car. CARB 1968.2 names this very design, a control unit holding manual and automatic variants that lights the MIL when the wrong one is active. GM's 2011 Saab 9-5 treats U0302 as a configuration fault checked at 9-16 V without wiring tests, and the Volkswagen tip 01-18-10TT names it among codes after an engine controller swap. U0101 stands for lost contact, U0402 for invalid data. Expect a MIL and possibly gearbox limp mode.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number3 / 02

Possible causes

  • Engine controller coded for the wrong transmission type high
  • TCM or ECM replaced or updated without matching the partner medium
  • Programming of the TCM aborted low

Symptoms

  • Check engine light on
  • Harsh or missing shifts, transmission in limp mode
  • Code appears after engine or transmission controller work

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0302

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication