OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U02BF

Lost Communication With Interior Lighting Control Module B

Many cars spread cabin lighting over several controllers; module B is a second unit beside module A (U024A), for example for ambient strips or a rear zone. Such nodes are usually LIN slaves of the body computer, a single-wire bus of up to about 19.2 kbit/s in which the master can detect nodes that fail. U02BF means module B no longer replies. No manufacturer documents U02BF publicly or says which unit carries the letter B. Stellantis illustrates how a separate lighting unit is serviced: on 2023-2026 Wagoneer models and the 2023-2027 Grand Cherokee the auxiliary/ambient lighting module must match the vehicle configuration with two or three seat rows; if PROXI is wrong, it is recoded and hard-reset instead of replaced (GPOP 9100834). Expect dark or fixed-colour zones; driving is not affected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / BF

Possible causes

  • LIN wire or connector of module B loose, damaged or corroded high
  • Vehicle configuration does not match the module, module not reset after coding medium
  • Lighting module internally faulty or without supply low

Symptoms

  • Some cabin or ambient lights stay dark
  • Colour or brightness of a light zone can no longer be changed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U02BF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication