U02BD
Lost Communication With Night Vision Control Module
The night vision control module evaluates an infrared camera, either a passive thermal unit that sees body heat or an active near-infrared system, picks out pedestrians and animals and passes image and warnings to the cluster or head-up display. U02BD is stored when a listening module, usually the body controller, hears nothing more from it. Jeep documents the case for the 2021-2023 Grand Cherokee including the 4xe (STAR S2208000163): the BCM holds U02BD-00, the cluster logs B0125-02 for the night vision module, and the system stays dark. Causes were female terminals in harness connector D3944A that were misaligned or held back by a solder spot, so the module's pins bent or never made contact. Realigning terminals or a connector kit cures it; the module is replaced only for lasting pin damage. Driving is unaffected.
Possible causes
- Misaligned or not fully seated terminals in the module connector high
- Bent pins on the night vision module medium
- Module supply missing or module internally faulty low
Symptoms
- Night vision display stays dark or the function is unavailable
- Pedestrian or animal warnings at night are missing
- Matching night vision code stored in the instrument cluster
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U02BD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.