OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U02BB

Lost Communication With EVAP System Purge Pump

The purge pump actively pushes fuel vapour from the charcoal canister into the intake, which turbocharged engines need because they often lack intake vacuum. GM fits it to models such as Blazer, Encore GX, XT4 and Silverado 1500 as a separate unit with its own electronics, linked to the ECM by LIN. GM's 2025 engine tables describe U02BB directly: the ECM marks the pump as lost when its response frame has been absent for at least 250 ms, checked once the LIN channel has been active for 3 s at 11 to 18 V; GM rates it Type B, meaning the lamp waits for a second failing trip. Pump failures were common enough that GM extended coverage to 15 years/150,000 miles (N242484740), there with the P146x pump codes. While the pump is mute the canister is not purged and evaporative tests are suspended.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / BB

Possible causes

  • Purge pump electronics failed (known GM failure, extended coverage) high
  • LIN wire or pump connector damaged, corroded or unplugged medium
  • No supply from the actuator or powertrain relay, poor ground medium

Symptoms

  • Check engine light after two drives
  • Further EVAP or purge pump codes stored
  • Possible fuel smell; driving itself usually normal

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U02BB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication