OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U02B6

Lost Communication With Rear Radar Module A

Rear radar modules are hidden behind the bumper corners at the back and supply blind spot detection, which in its advanced form uses one sensor on each side, and rear cross traffic alert. U02B6 means rear radar A has stopped communicating. Stellantis cites the pair U02B6/U02B7 for the rear corner radars of the 2022-2023 Jeep Grand Cherokee, Wagoneer and Grand Wagoneer (GPOP 9100222, part 68629572): run the DTC test, then pin-unlock and swap the left and right radars and drive the car to calibrate them; if the fault stays on the same side after the swap, the wiring there is to blame. Which side is A is not stated there; on the 2026 Mercedes-Benz CLA electric, rear radar A is the outer left one. Blind spot warning on that side drops out.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / B6

Possible causes

  • Wiring or connector in the rear bumper damaged, e.g. after a parking knock or bumper repair high
  • Rear radar A failed (confirmed when the fault follows a left/right swap) medium
  • Water or corrosion in the radar connector medium

Symptoms

  • Blind spot warning unavailable on one side
  • Rear cross traffic alert off, assistance message

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U02B6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication