OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U02B3

Lost Communication With Driver Monitoring System Module

The driver monitoring module evaluates an interior camera that follows where the driver looks, how open the eyes are and how the body is held, to judge distraction and drowsiness; the EU's General Safety Regulation makes distraction warning mandatory on all new vehicles from July 2026. U02B3 is logged when this module stops talking to the network. No manufacturer documents U02B3 publicly. Subaru runs a separate DMS control unit on the 2019-2020 Forester and 2020 Legacy and Outback that also stores up to five driver profiles, which technicians back up with SSM4 before service (bulletin 07-175-20). Stellantis names a DMSM among the ADAS modules of the 2022-2025 Grand Cherokee and asks for 90 % battery charge and a 10-minute bus sleep after a deep discharge. Attention warnings and hands-off functions are then lost.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / B3

Possible causes

  • Deep battery discharge or replacement left the module offline high
  • Connector at the camera or module loose, e.g. after steering column or dash work medium
  • Driver monitoring module or camera failed medium

Symptoms

  • Driver attention or drowsiness warning unavailable
  • Hands-free or lane assistance switched off with a service message
  • Stored driver profiles not recognised

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U02B3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication