U02B1
Lost Communication With Comfort and Convenience Display A
Comfort and convenience displays are touch screens for climate, seats and similar settings, separate from the main infotainment screen. Stellantis calls them CCDM; on the Jeep Grand Wagoneer a front unit (CCDMF) is joined by a rear unit (CCDMR) for the second row, and the front one can lock out the rear. Which of them counts as A is not published. U02B1 is set when display A no longer answers the module that polls it, so its touch inputs and status vanish from the network. No manufacturer documents U02B1 itself. Field cases of these screens concern firmware: phantom touches cured by newer parts (STAR S228A000013) and wrong massage graphics fixed by a newer part and proxi alignment (S2508000061). Driving is unaffected.
Possible causes
- Loose or damaged connector behind the display, often after dash work high
- Fuse, supply or ground of the display interrupted medium
- Display module or its firmware failed medium
- Low battery voltage during start-up low
Symptoms
- Comfort display stays dark or does not react
- Climate or seat settings cannot be changed from that screen
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U02B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.