OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U02AC

Lost Communication With Turbocharger/Supercharger Boost Control A

Boost control A is the actuator that sets boost, usually a vane or wastegate drive with its own electronics that receives targets and reports status over a data link. U02AC means the engine controller has stopped hearing from it. No manufacturer documents U02AC publicly. GM files the same situation under U010C: its 2025 tables flag the Turbocharger Boost Control Module when frame $099 is missing for over 10 s or $499 for over 9.2 s, with battery above 11 V and the bus itself healthy, and rate it Type B (lamp after two trips). CARB requires boost actuators to be monitored and a lost digital link to carry its own code. Ford's patent on an electric wastegate shows the fallback: a spring keeps the valve closed. Expect a warning lamp and reduced power.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / AC

Possible causes

  • Corroded or loose actuator connector, chafed bus wires near the hot turbocharger high
  • Actuator loses its supply or ground (fuse, relay, ground point) medium
  • Electronics inside the boost actuator failed, often from heat medium
  • Weak 12 V battery causing modules to drop off during cranking low

Symptoms

  • Check engine lamp
  • Noticeably less boost and power, engine in reduced-power mode
  • Boost actuator values missing or frozen in the scan tool

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U02AC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication