OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U02AA

Lost Communication With Engine Disconnect Clutch

In a parallel hybrid the engine disconnect clutch sits between crankshaft and motor-generator. Ford's patent US9296380B2 shows the layout: with the clutch open, the electric machine drives alone; closed, it lets the engine add torque or be started, and the controller exchanges signals with the clutch. Honda's two-motor hybrid uses a lockup clutch that couples the engine directly at higher speeds. U02AA concerns designs in which a smart actuator or sensor of the clutch sits on the network, and it is set once that device stops reporting. No manufacturer documents U02AA publicly. CARB 1968.2 treats hybrid components that affect emissions or engine operation as monitored inputs. Without clutch status the hybrid controller cannot coordinate engine starts, so electric-only driving or engine assist is usually blocked.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / AA

Possible causes

  • Fuse, supply or ground of the clutch actuator faulty medium
  • Harness or connector at the transmission or hybrid module damaged medium
  • Software fault in actuator or hybrid controller medium
  • Clutch actuator electronics internally failed low

Symptoms

  • Hybrid system warning, MIL possible
  • No electric-only driving or engine runs continuously
  • Rough or delayed engine starts while driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U02AA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication