U02A8
Lost Communication With Engine Sound Control 2
A second engine sound control exists where one unit is not enough, for example when interior speakers and an exterior sound source are handled separately or two actuators sit at different points of the body. Active sound design covers both directions: inside it shapes what occupants hear, outside it can give a car a recognisable voice. U02A8 is stored when unit 2 drops off the network while unit 1 may still work. Keep it apart from pedestrian warning sound, which on electric cars has its own legal basis and module. No manufacturer documents U02A8 publicly; Ford, for one, runs its engine sound enhancement inside the audio control module, enabled by software. The fault does not affect driving, emissions or engine control, only the sound picture.
Possible causes
- Fuse, supply or ground of sound unit 2 faulty medium
- Water or corrosion at a connector in an exposed mounting point medium
- Unit 2 coded as fitted but missing or disabled medium
- Sound control unit 2 internally failed low
Symptoms
- Part of the engine sound effect missing
- Code stored without other noticeable effect
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U02A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.