OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U029E

Lost Communication With NOx Sensor B

Sensor B usually measures NOx at the outlet, behind the SCR catalyst, so the SCR efficiency verdict depends on it. U029E is logged once its CAN messages fail to reach the engine controller. GM monitors the post-catalyst frames the same way as for sensor A and also treats a loss as Type A; Ford's 2023 diesel summary reacts after more than 1 s, and Ford's 2014 code list shows it with MIL. Typical causes are installation errors: Volkswagen's tech tip 01-18-09TT for the 2015 Golf, Jetta, Passat and Beetle 2.0 TDI tells technicians who see U029E after campaign 23Y8 to look for swapped plugs at the front sensor and its adapter and an unseated rear sensor plug. Ford's SSM 50455 ties it on 2021 F-Super Duty 6.7 L to an incomplete PCM reprogramming. The tailpipe check stays open.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 9E

Possible causes

  • Sensor plugs swapped or not fully seated after service work high
  • Water or corrosion in the NOx sensor connectors medium
  • Incomplete or wrong engine control module programming medium
  • NOx sensor B control unit internally failed low

Symptoms

  • MIL on
  • SCR efficiency monitor not completed
  • Engine derate on some heavy trucks

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U029E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication