OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U029C

Lost Communication With Drive Motor Control Module D

Letter D refers to the controller of a fourth drive motor, which presupposes individual-wheel drive. Rivian's quad-motor R1S is the familiar production case: each wheel gets its own frame-mounted Bosch motor, so torque can be split freely between all four corners at any time. U029C says module D has gone silent on the network. If it still sent frames with bad content, U059D would be stored instead; a silent third motor is U029B. No manufacturer documents U029C publicly, so which wheel letter D belongs to and how the car reacts are vehicle-specific. CARB 1968.2 obliges hybrid OBD systems to notice when a digital input stops communicating. A plausible response is to drop the silent motor, cap the torque on the other side so the car still runs straight, and warn of reduced power.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 9C

Possible causes

  • Fuse, low-voltage supply or ground of module D faulty medium
  • Bus wiring near the wheel drive unit chafed or wet medium
  • Software fault or failed update of module D low
  • Drive motor control module D internally failed low

Symptoms

  • Reduced power and loss of torque vectoring
  • Drive system warning in the cluster
  • Uneven traction when accelerating

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U029C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication