OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U029B

Lost Communication With Drive Motor Control Module C

Drive motor control module C is the inverter and controller of a third traction motor, so it only occurs on vehicles with three or four drive motors. Production examples are the tri-motor version of the GMC Hummer EV, which drives its rear axle with two motors, and Rivian's quad-motor R1T and R1S with one motor per wheel. U029B is stored when the propulsion or vehicle controller stops receiving any periodic messages from module C. Frames that still come but carry unusable values are U059C; U0292 and U029C cover the second and fourth motor controllers. Which motor gets letter C is the maker's decision, and no manufacturer documents U029B publicly. For hybrids, CARB 1968.2 demands that missing communication from digital inputs be detected. Expect that motor to be shut off and reduced power and traction.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 9B

Possible causes

  • Fuse, low-voltage supply or ground of module C faulty medium
  • Damaged or corroded bus wiring or connector at the drive unit medium
  • Software fault or interrupted programming of module C medium
  • Drive motor control module C internally failed low

Symptoms

  • Reduced power warning, one motor disabled
  • Torque vectoring or all-wheel-drive functions unavailable
  • Drive system warning in the cluster

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U029B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication