U029A
Lost Communication With Hybrid/EV Battery Pack Sensor Module
The battery pack sensor module is the electronics inside the high-voltage battery that reports pack current and voltage; many designs house it together with the main contactors. U029A means the battery or vehicle controller no longer hears from it. Stellantis documents the code in the battery pack control module of the 2024 Dodge Charger with 400 V electric drive: bulletins 08-026-25 Rev. B and 08-126-25 Rev. B reflash several modules and, if U029A stays, call for a six-minute sleep with the scan tool unplugged before a BPCM soft reset. Audi files U029A00 under address 8C for the 2025 Q5 e and the 2024 Q8 Sportback e-tron. Ford's 2014 code list shows it without the lamp flag. Lacking these values, the car may refuse to drive or charge.
Possible causes
- Outdated software in the battery control module or sensor module high
- Code latched after programming because the network never went to sleep medium
- Moisture or poor contact at the battery low-voltage connector or bus wiring medium
- Battery pack sensor module internally failed low
Symptoms
- Wrench or turtle symbol, reduced power
- Vehicle does not enable drive or stops charging
- High-voltage system warning in the cluster
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U029A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.