U0299
Lost Communication With DC/DC Converter Control Module B
A second DC/DC converter, B, appears where a single support stage cannot serve every consumer or where two networks are fed separately. FCA documents the code: in PCM reflash bulletins 18-023-19 Rev. B and 18-020-21, covering 2019 Cherokee models with the 3.2 V6 and stop-start, U0299 is named as loss of contact to DC-DC converter 2. Next to it stand performance and over-temperature codes for converter 2 (P0EA5, P0EA6) and invalid data from converters A and B. Customers report a lit MIL and an engine that does not always restart after an auto stop; the remedy is new PCM software, not a new converter. With B missing, start-stop is typically withdrawn and voltage-sensitive electronics may reset during restarts.
Possible causes
- Powertrain control module software (FCA update) high
- Supply, fuse or ground of converter B faulty medium
- Bus wiring or connector to converter B damaged medium
- Converter B internally failed, e.g. after overheating low
Symptoms
- Check engine lamp on
- Engine does not always restart after auto stop
- Start-stop function disabled
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0299
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.