U0296
Lost Communication With AC/DC Converter Control Module A
An AC/DC converter rectifies alternating current; in plug-in vehicles the best known example is the on-board charger, which also runs in the opposite direction of an inverter feeding a motor. U0296 means converter module A no longer reports on the bus. CARB obliges plug-in hybrids to detect charger malfunctions that prevent full charging or limit the charge rate. Volvo is the maker that names the code: on plug-in XC60 and XC90 models from 2022, brake control module 2 logs BCM2-U029600, the ESC lamp comes on and Pure mode is locked out whenever a third-party device or Y-splitter loads the diagnostic socket (TJ 36559). On 2016–2018 T8 models the code appeared intermittently next to rear-axle inverter faults and cleared with inverter software (TJ 33723).
Possible causes
- Aftermarket device or Y-splitter on the diagnostic connector disturbing the bus high
- Outdated software in the converter or inverter module medium
- Supply, ground or bus wiring of converter A faulty medium
- Converter module A internally failed low
Symptoms
- ESC or hybrid system warning in the cluster
- Pure electric driving not available
- Charging from the grid not possible
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0296
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.