OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0292

Lost Communication With Drive Motor Control Module B

Electric and hybrid vehicles with a motor on each axle usually give the inverter of the second motor the address drive motor control module B. U0292 means the coordinating controller no longer receives its messages. Audi documents this for the 2019 e-tron quattro: bulletin 2055804 finds U029200 in the electric drive control unit J841 or the engine control unit J623, while the car refuses to become ready, limits the selectable positions and shows various warnings; the low-voltage harness of the rear motor chafes because of its routing, sometimes blowing fuses SJ7 or SD5. Mitsubishi's 2023 Outlander PHEV lists U0292-00 as lost communication with power drive unit B, the rear unit. Expect warnings, loss of drive on that axle or no ready state.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 92

Possible causes

  • Low-voltage harness of the second drive unit chafed high
  • Blown supply fuse of module B medium
  • Connector at the inverter of module B loose or corroded medium
  • Inverter or control module B internally failed low

Symptoms

  • Vehicle does not become ready to drive
  • Drive system warnings, restricted gear selection
  • Only one axle driven, reduced power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0292

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication