OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0290

Lost Communication With Active Aerodynamic Feature Control Module D

Module D is the last of four aerodynamic control addresses and fits vehicles in which aerodynamics are integrated with chassis functions. Ford's Mustang GTD is such a case: its hydraulic system serves both the suspension and the active aero elements, and service message SSM 55237 lists the warning Active Aero Fault together with suspension and front lift messages, caused by vehicle dynamics module software that reports faults wrongly and fixed by reprogramming. U0290 means that controller has lost the fourth aero module entirely. No manufacturer documents U0290 publicly or says which element module D drives. Depending on the design, a failure can freeze one element or cause the vehicle to restrict modes and top speed. For CARB, such parts are active off-cycle technology.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 90

Possible causes

  • Software of module D or the vehicle dynamics controller medium
  • Bus or supply wiring to module D damaged medium
  • Moisture or corrosion at the connector of module D medium
  • Module D internally failed low

Symptoms

  • Active aero fault message
  • Drive modes or top speed restricted
  • Aero element stuck in one position

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0290

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication