OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U028D

Lost Communication With Active Aerodynamic Feature Control Module A

Active aerodynamic features change the airflow around the body while driving, for example an extending front air dam, a movable wing or ride height that drops at speed. CARB defines them as active off-cycle technologies, cites grill shutters and speed-dependent ride height as examples and requires counters that record how long they are deployed. U028D is set when the first control module of such a feature stops sending on the network. No manufacturer documents U028D publicly. The front air dam has its own code: Ram 1500 owners see the check engine lamp with U0645 for lost contact and C0604 for poor function, and FCA's procedure starts with a check for impact damage before cycling the dam with the scan tool. Without the module, the element stays in its last position.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 8D

Possible causes

  • Element or its wiring damaged by kerbs, snow or debris high
  • Water or corrosion at the module connector medium
  • Fuse, supply or ground of module A faulty medium
  • Control module A internally failed low

Symptoms

  • Active aero warning message in the cluster
  • Element does not deploy or retract
  • Slightly higher consumption at highway speed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U028D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication