U028A
Lost Communication With Transmission Fluid Pump Module B
An electric transmission fluid pump with built-in electronics holds clutch pressure and lubrication whenever the engine is stopped, in auto stop or electric driving. Module B is a second pump of this kind; U028A means the transmission or hybrid controller no longer hears its status frames. No manufacturer documents U028A or names a pump B publicly, so the reaction must be inferred from pump A. Stellantis calls that unit transmission fluid pump module 1 and ties U0287 on the Wrangler and Grand Cherokee 4xe to a failed in-pan pump with MIL and limp mode (21-041-26). Hyundai stores U028700 in the transmission unit of the Santa Fe and Tucson without any warning lamp and merely blocks Idle Stop and Go (26-AT-002H). For B, expect stop-start or electric drive to be withdrawn.
Possible causes
- Electric pump B or its integrated electronics failed high
- Corroded or loose pump connector, oil wicking into the connector medium
- Supply, ground or bus line to pump B interrupted medium
- Transmission controller software outdated low
Symptoms
- Start-stop function no longer active
- Electric driving blocked or engine keeps running
- Transmission warning, harsh engagement after an engine stop
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U028A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.