U0287
Lost Communication With Transmission Fluid Pump Module A
An electric transmission fluid pump with its own control electronics keeps hydraulic pressure available whenever the engine stands still, in auto stop or electric driving. Stellantis calls it transmission fluid pump module 1; the TCM sets U0287 when it stops responding. On 2021–2025 Jeep Wrangler and Grand Cherokee 4xe, TSB 21-041-26 links the code with MIL and limp mode to a failed in-pan pump, and 08-082-25 traces cases to a damaged high-voltage cable whose noise reaches the pump circuit. The 2026 Compass with 8F30 gets a new pump and TCM software (21-058-26), with stop-start off and a service transmission message. Hyundai sets U028700 in the pump itself on the 2.5 Santa Fe and Tucson with eight-speed automatic, disabling Idle Stop and Go (26-AT-002H).
Possible causes
- Electric fluid pump or its integrated electronics failed high
- Pump connector not fully latched medium
- Damaged high-voltage cable inducing interference on the pump circuit (hybrids) medium
- Transmission control module software outdated low
Symptoms
- Malfunction indicator lamp and service transmission or hybrid message
- Engine stop-start disabled
- Limp mode on plug-in hybrids
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0287
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2026/MC-11034324-0001.pdf
- static.nhtsa.gov/odi/tsbs/2025/MC-11015883-0001.pdf
- static.nhtsa.gov/odi/tsbs/2026/MC-11035326-0001.pdf
- static.nhtsa.gov/odi/tsbs/2026/MC-11028968-0001.pdf
- static.nhtsa.gov/odi/tsbs/2024/MC-11005230-0001.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10225982-9999.pdf