OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0273

Lost Communication With Lighting Driver Control Module A

A lighting driver control module sits in or on a headlamp and powers its LED groups on command from a higher-level lamp or body controller. U0273 means that controller hears nothing from driver module A within its timeout. Lincoln's 2025 Navigator is a documented case: its headlamps use four lighting driver control modules, LDCMA to LDCMD, and module A received over-the-air release LDCMA-25.10.08 to correct colour and brightness at switch-on. GM's 2021 Tahoe and Suburban show that such drivers are separate parts, replaced left and right to fix a bluish daytime light. No maker publishes U0273 itself or which lamp letter A serves. The lamp may keep a basic beam while adaptive or animated functions stop.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 73

Possible causes

  • Moisture or corrosion at the headlamp connector of driver module A high
  • Driver module A without supply or ground (fuse, splice) medium
  • Module software outdated or update interrupted medium
  • Driver module A internally faulty (often only with complete headlamp) low

Symptoms

  • Lighting warning in the instrument cluster
  • Adaptive high beam, cornering light or light animation unavailable
  • LED segments on one headlamp dark or in a default setting

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0273

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication