OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0272

Lost Communication With Seat Control Switch Module D

Seat control switch module D is the fourth switch unit in this series; no manufacturer documents U0272 publicly or says which seat it belongs to. Such switches need not sit on the seat at all. On 2021–2023 Escalade, Tahoe, Suburban and Yukon with the power-folding third-row bench (RPO AS8) the folding switches are in the overhead console and command the K169 folding third-row seat module; GM later dropped their red latch indicators (PIT6041). Jeep has technicians let a Grand Wagoneer third-row seat relearn its end stops by pressing its switch twice after the vehicle has been off for two minutes (9100364). So check the seat module and its learned state as well as the switch. If switch D falls silent, the seat it serves can no longer be moved from there.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 72

Possible causes

  • Wiring to a switch mounted away from the seat (console, roof, trim) interrupted medium
  • Seat module lost its learned positions or needs new calibration medium
  • Switch module D without supply or ground medium
  • Switch module D internally faulty low

Symptoms

  • Rear or folding seat does not respond to its switch
  • Seat stops short of its end position

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for U0272

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication