U026C
Lost Communication With Image Processing Sensor H
U026C rounds off the GM object detection group reported by the Escalade's active safety module; GM leaves open which sensor letter H stands for. The PIT5487 series, revised from 2016 up to version F in 2020 for model years 2015–2020, shows how the code turns up next to lighting faults. Apart from camera, park assist, adaptive cruise and driver assist messages, the turn signals may flash fast and lamp body codes such as B2575 or B2605 can join, because one chafed bumper harness feeds both lamps and sensors. Such a mix of lighting and sensor faults at the front corner is the cue to inspect that harness before replacing any module. Assistance that uses sensor H stays unavailable until communication returns; no MIL.
Possible causes
- Chafed bumper harness supplying both lamps and sensors high
- Shared fuse blown by a short in the front wiring medium
- Connector of sensor H loose or corroded medium
- Sensor H internally faulty low
Symptoms
- Turn signal flashes fast, front lamps partly dead
- Lamp body codes stored together with sensor U-codes
- Service Driver Assist or surround camera message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U026C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.