U026B
Lost Communication With Image Processing Sensor G
Letter G, too, is visible only through GM: U026B appears in the active safety controller of Escalades from 2015 fitted with the Y66 assistance package, always grouped with U0265, U0268, U0269, U026A, U026C and U0075, and GM does not say which radar or camera G is. The grouping is itself the diagnostic hint. U0075 means that an entire communication bus has gone off, so if it shows up with several sensor codes, a shared cause such as supply, a short on the bus or harness damage is far more likely than a faulty sensor G. A lone U026B without its neighbours instead points to that module, its plug or its own feed. The earliest bulletins of 2015 and 2016 already list exactly this set (PIT5441, PIT5487A). The assistant using sensor G stays off; no MIL.
Possible causes
- Common cause on the object detection bus or its supply when several codes appear high
- Plug or fuse of sensor G when the code appears alone medium
- Faulty scan tool cable producing false codes medium
- Sensor G internally faulty low
Symptoms
- Driver assistance or object detection service message
- Code alone or together with U0075 and other sensor codes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U026B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.