OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0264

Lost Communication With Camera Module - Rear

The rear camera module supplies the reversing picture; whichever unit expects its messages stores U0264 when they stop, depending on the brand the radio, the body controller, the cluster or a central vision module. FCA uses it widely: a 2021 Ram 1500 logged it in the radio after connector XY552A worked loose once the tailgate had been off (S2108000050), and 2019–2020 Ram heavy-duty trucks with surround view set it in the CVPM next to B217A-92. On a 2019 Mazda3 a new rear camera plus old CMU software gave U0264:00 and a black center screen, so the CMU is updated first (09-021/19). Land Rover pointed it at the camera control module of its five-camera system (LTB00551NAS1); for the Transit, Ford calls a U0264 in a newly fitted BCM ignorable (SSM 47123). The reversing view is lost, driving is not.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 64

Possible causes

  • Camera connector in tailgate or liftgate loose or not fully seated, often after body work high
  • Pinched or chafed wire in the liftgate, camera fuse blown medium
  • New camera paired with outdated software in the display or vision module medium
  • Rear camera or camera control module internally faulty low

Symptoms

  • Black or blank screen when reverse is selected
  • Camera system fault message, surround view button greyed out
  • Code stored in radio, cluster or body controller, sometimes with blind spot faults

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0264

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication