OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0262

Lost Communication With Audio Amplifier B

Large sound systems may use a second external amplifier, audio amplifier B. Such amplifiers take part in network traffic: a patent on modular add-on sound systems explains that the factory amplifier decodes gain commands that the head unit sends over the CAN bus, and that a replacement amplifier must therefore understand the maker's bus format, such as GMLAN. No manufacturer documents U0262 publicly or says which speakers B drives. The single-amplifier case shows typical causes: on the 2023 Mazda CX-50, static or silence with U0186:08 (amplifier unreachable) and U2145:08 came from rear harness connectors 0920-114 and 0920-115D that were not locked (SA-058-22). For B, a receiver such as the head unit sets the code once its frames stop. The speakers fed by B fall silent; U0563 means corrupt data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 62

Possible causes

  • Amplifier connector not locked or pushed back, often in the rear harness high
  • Amplifier B without power or ground (own fuse, switched supply) medium
  • Aftermarket audio installation that removed or bypassed the second amplifier medium
  • Internal failure of amplifier B low

Symptoms

  • Some speakers silent while others still play
  • Static, crackling or sound dropping out

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0262

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication