U0260
Lost Communication With Seat Control Switch Module A
Many power seat switches now contain electronics that scan the keys and report the result over a LIN or multiplex link rather than carrying motor current. A Lear patent describes a seat motor assembly with integrated electronics that talks to an external switch over a one- or two-wire multiplex link. Mercedes shows such a switch failing for series 206 to 297, for example C-, E- and S-Class, GLC and EQS: the door-mounted switch group for seat adjustment (front left: SSE-VL) could remain in sleep mode after a software error, so the seat did not move although the quick test stored no fault; unplugging the switch resets it, new switch software prevents a repeat (LI82.00-P-080029). No manufacturer documents U0260 publicly. When switch module A stops sending, its seat cannot be adjusted from it; switch B is U0261.
Possible causes
- Switch module software stuck in sleep mode, reset by unplugging and fixed by update high
- Loose or corroded connector or broken wire at the switch in the door or seat trim medium
- LIN line to the seat module shorted or open medium
- Internal failure of the switch module low
Symptoms
- Seat cannot be adjusted with its switch
- Memory, lumbar or massage keys on that switch without function
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U0260
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.