OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U025F

Lost Communication With Electronic Brake Booster Control Module B

U025F concerns a second electronic brake booster control unit, B. No manufacturer documents this code publicly, and none states which physical unit would carry the letter. Bosch describes where two units make sense: in automated vehicles its integrated power brake, which merges boosting and stability control in one unit, is backed by a separate redundant brake unit, and the iBooster together with ESP supplies the redundancy such cars require. Ford's booster (Escape, Explorer, Bronco Sport, Aviator and Corsair of 2020-2021) shows that a power interruption at that unit lights the ABS and stability lamps through a code in the ABS module (SSM 51374). If unit B goes silent, expect brake or driver-assist warnings and the loss of the backup path, which can switch off automated driving. Unit A is U025E.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 5F

Possible causes

  • Second brake unit without power or ground (separate fuse or supply path) high
  • Damaged bus wiring or connector to the redundant unit medium
  • Internal failure of brake unit B medium

Symptoms

  • Brake system or driver-assist warning in the cluster
  • Automated or assisted driving functions unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U025F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication