OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U025B

Lost Communication With Special Purpose Vehicle Control Module C

With U025B a module on the bus reports that controller C (third slot of four) has gone quiet. No manufacturer documents this code publicly. Ford's body builder bulletin for its 2023 Super Duty shows a pitfall that applies to all slots: the Upfitter Integration System module only cooperates with the programming tool when it, the SYNC module and the body control module carry matching software, and trucks built before 12 June 2023 need a reflash first. A partly updated set can therefore leave an add-on unit unanswered. The Audi patent on configurable conversion modules adds that such units may hang on CAN, LIN or other links, so the missing node is not always on the main bus. Check software levels and the conversion paperwork before replacing hardware. Base vehicle functions normally remain; U055C means corrupt data.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number2 / 5B

Possible causes

  • Software of vehicle modules and add-on unit not at matching levels high
  • Controller C without power or ground from the upfit circuits medium
  • Fault on the sub-bus or link through which the unit is attached medium
  • Internal failure of controller C low

Symptoms

  • Conversion functions of unit C inoperative
  • Programming or configuration tool cannot reach the unit

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U025B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication